Configuration File Parameter Guide
331
ET685 Administrator and Provisioning Manual
Description:
This settings decides if the phone must add the http URL of the phone as
additional contact information
WARNING: Turning this setting on may cause a complete loss of VoIP
ability if the proxy/registrar does not support it. We urge you strongly to
leave it on off if you are not absolutely sure that it is supported by your
proxy/registrar.
Values:
on,off
Default:
off
Setting:
regular_font_min_font_size
Description:
VTech Phones with high resolution monochrome displays as well as USB
expansion modules use both a bold and a regular TrueType font. The bold
font is used on small font sizes (by default less then 17 pixels) when the
regular font renders glyphs at that are too skinny. This setting specifies the
minimum pixel size for using the regular font.
A value of zero disables the bold font; a very large value (e.g. 999) disables
the regular font.
Values:
integer >= 0; there is no max value
Default:
17
Setting:
reject_calls_with_603
Description:
When call is rejected (i.e. using the X button), the phone usually sends
failure SIP reply "486 Busy Here".
If this setting is on, the phone will send "603 Declined" instead of "486 Busy
Here" when the call is rejected.
Please note that this not affect the case when the call is rejected because
the phone is busy.
This setting is usefull if you want to have two different failure replies: "486
Busy Here" in case the phone is busy; "603 Declined" when the call is
rejected.
Values:
on, off
Default:
off
Setting:
release_sound
