VTech ET685 Administrator And Provisioning Manual Download

Page: 25 / 424

Provisioning

Back to Contents

ET685 Administrator and Provisioning Manual

The following hints apply to both ASCII Text Format and XML Format.

Hints

ASCII Text Format AND XML Format

Start

1. Start with a factory reset phone



Apply the desired modifications in your

working (live)

phone environment

first.



Observe the

stability and performance

of the applied

changes.

2. Do

NOT

use the complete parameter list as starting point,

instead:



Delete or uncomment

unused

configuration

parameters from the complete parameter list.



Specify only those parameters you really want to
change --> Check the meaning of each parameter
before usage.



Finally your setting file may contain only a

few

parameters

Flags

1. Do

NOT

use read-only flags at the beginning. They can be

added at the end in order to protect certain parameters to
be notified by the user!

2. Inside firmware setting files do

NOT

use any flags at all.

Network/System
Settings

1. Do

NOT

provide network settings when using DHCP.

2. Do

NOT

specify setting_server unless a redirection to a

different setting server is desired.



Remember the phone has already obtained the setting
file correctly -

repeated usage of the same setting

server can have unpredictable side effects and is
NOT recommended.

Firmware Setting
Files

1. Do NOT specify neither

bootloader

nor

firmware

inside

setting files:



In order to perform automated firmware updates
specify a firmware setting file URL inside firmware
status which points to the firmware setting file
containing the firmware image URL.

2. Inside

firmware setting files

use

ONLY

the configuration

parameters

bootloader

firmware.

Summary of Contents for ET685









































































































































































































































































































































































































































Search results

Summary of Contents for ET685

Reviews:

Related manuals for ET685

Brands by name

Popular brands

VTech ET685, Administrator And Provisioning Manual

Search results

Summary of Contents for ET685

Reviews:

Related manuals for ET685

Brands by name

Popular brands