Volkswagen CC 2012, Workshop Manual

Page: 218 / 222

28 – Ignition system
1 Ignition system
⇒ “1.1 Assembly overview - ignition system”, page 212
⇒ “1.2 Removing and installing ignition coils with output stage”,
page 213
⇒ “1.3 Removing and installing engine speed sender G28 ”, page
215
⇒ “1.4 Test data, spark plugs”, page 215
1.1 Assembly overview - ignition system
Note
The engine speed sender - G28- can be found on the cylinder
block ⇒ Item 10 (page 160) .
1 - Ignition coil with output
stage - N70, N127, N291,
N292, N323, N324-
❑ Removing and installing
⇒ page 213
2 - Connector
❑ black
❑ Use assembly tool -
T10118- to pull off.
3 - Holder
❑ For connector for knock
sensor 1 - G61- .
4 - 20 Nm
5 - Connector
❑ Black, 3-pin.
❑ Gold-plated contacts on
sensor and connector.
6 - Knock sensor 1 - G61-
❑ Location: cylinder block
exhaust side
7 - 20 Nm
❑ The specified torque in‐
fluences the function of
the knock sensor.
8 - Exhaust camshaft adjuster
❑ Identification: 32A.
❑ With sender wheel for
Hall sender 2 - G163-
❑ Removing and installing
⇒ page 105
9 - Cover
10 - Connector
❑ Black, 3-pin.
CC 2012 ➤ , Passat 2011 ➤ , Passat Variant 2011 ➤
6-cylinder direct-injection engine (3.6 l engine, 4V) - Edition 06.2019
212
Rep. gr.28 - Ignition system