1 - To top of expansion tank
2 - Rear coolant pipe
3 - 20 Nm
4 - From heat exchanger
5 - To heat exchanger
6 - Coolant pipe
7 - 10 Nm
8 - From gear oil cooler
9 - Upper side coolant pipe
10 - 10 Nm
11 - Radiator outlet coolant -
G62-
❑ Before removing, re‐
lease pressure in cool‐
ing system if necessary.
12 - O-ring
❑ Renew
13 - Retaining clip
❑ Check for firm seating
14 - 10 Nm
15 - To top of radiator
16 - From additional cooler
❑ If installed.
17 - To additional cooler
❑ If installed.
18 - From bottom of radiator.
19 - Non-return valve
❑ Observe installation position
❑ Arrow on non-return valve points in direction of flow
20 - Lower side coolant pipe
21 - 25 Nm
22 - To gear oil cooler
❑ If installed.
23 - Continued coolant circulation pump - V51-
❑ Removing and installing
24 - 8 Nm
25 - Thermostat
❑ Checking
❑ Removing and installing
26 - Coolant pipe
❑ With thermostat housing
27 - Sealing ring
❑ Renew
CC 2012 ➤ , Passat 2011 ➤ , Passat Variant 2011 ➤
6-cylinder direct-injection engine (3.6 l engine, 4V) - Edition 06.2019
148
Rep. gr.19 - Cooling
