VeEX VePAL TX300M, User Manual

Page: 39 / 421

Test Port:
Optical or Electrical.
Optical interface is available for STM-0, STM-1, STM-4, STM-16 and STM-64 signals.
Electrical interface is available for STM-0E, STM-1E signals.
Clock Source:
Can be configured as follows:
Internal clock:
The clock for the transmitter is derived from the internal clock. The internal clock has an accuracy of +/-
3.5ppm conforming to G.812 recommendations.
External clock:
The clock for the transmitter is derived from a 1.5MHz, 2MHz, 1.5Mbps, 2Mbps, or 64kbps signal on the
SMA, RX2 balanced, or RX2 BNC unbalanced interfaces.
Rx:
The clock for the transmitter is derived from the received signal, and the jitter of the incoming signal is suppressed.
Offset:
The clock for the transmitter is derived from the internal clock generator. It can change the offset while
measurements are running. Use the numeric key to increase and decrease the frequency shift, up to 0.01ppm. Frequency
offset: ± 50ppm with 1, 0.1, 0.01ppm resolution.
Go back to top Go back to TOC
Structure
Tapping the Tx Structure box opens the Tx Structure Setup screen which shows two display modes: Text mode and Graphical
mode. Tap on the
Text/Graphical
button to switch between the two modes.
Tx Structure Setup - Text Mode
TX300S_e-manual_D07-00-064P_RevA00