VeEX VePAL TX300M, User Manual

Page: 270 / 421

1 GE Copper Port
Auto Negotiation:
On or Off. Matches the test set's negotiation settings to those of the link partner.
Speed
(only when Auto Negotiation is Off): 10 Mbps, 100 Mbps, 1000 Mbps.
Duplex
(only when Auto Negotiation is Off): Half or Full.
Advertisement
(only when Auto Negotiation is On): Default-All or Custom. Custom options include 10/100/1000M/Half or
10/100/1000M/Full.
Flow Control:
TX On, RX On, Both On, or Off.
When flow control is On, the test set will respond to pause frames received by the link partner by adjusting the transmit
rate.
When flow control is Off, the test set ignores all incoming pause frames from the link partner and continues transmitting
at the configured transmit rate.
MDIX:
Off, On, or Auto. When MDIX is set to Auto, the test set detects the required cable connection type and configures the
port connection properly for interfacing the partner device, eliminating the need for crossover cables.
10GE Port Setup
Go back to top Go back to TOC
10 GE Port
10GE Mode:
LAN or WAN
WIS Mode
(only available in WAN mode): SDH or SONET
Flow Control:
Enable chosen as default option
Clock Offset (ppm):
The frequency may be offset in parts per million
Status
Status tab
TX300S_e-manual_D07-00-064P_RevA00