VeEX VePAL TX300M, User Manual

Page: 326 / 421

CIR Test Configuration
CIR Test Config.:
Select Simple Test, Step Load Test, or Simple and Step.
Simple Test:
Starts the tests at the CIR.
Step Load Test:
Starts the test below the CIR and continues in steps until it reaches the CIR.
Simple and Step Load Test:
Step Load Test performs only if the Simple Validation test fails.
Tap on the
Test Duration
box to input a test duration (test duration must be less than 999 sec).
Tap on the table to modify the CIR value percentage for each step.
CIR Test Config
Go back to top Go back to TOC
15.4.1.1 Header Settings
Service #:
Select a service to configure
Service Name:
Assign a name to the service if desired.
Frame Size Type:
Fixed or EMIX (1GE only). A fixed frame size is chosen as default
Frame Size:
For Fixed Traffic Flow:
Input a fixed frame size within the range of 64-10000 bytes by tapping the value box.
TX300S_e-manual_D07-00-064P_RevA00