VeEX VePAL TX300M, User Manual

Page: 27 / 421

home menu.
Go back to top Go back to TOC
6.1 Signal Overview
Tap on the Signal tab to set up the Transmitter and Receiver interfaces and associated test parameters prior to running a test.
Signal tab
TX and RX Configurations
The Transmitter (TX) and Receiver (RX) configurations are grouped into a simple yet intuitive block diagram. The TX and RX
signal parameters can be modified by tapping the applicable block which brings up a new dialog window displaying additional
input and specific selection settings. The Transmitter transmits as soon as a valid configuration is entered. The Receiver will
check for a valid signal on its input so the measurement function is synchronized. When a test is not running, the LEDs will still
indicate errors and alarms, but any other results displayed will be the results of a previous test.
Coupling TX and RX
When the TX and RX signal structures are required to be identical or symmetrical, coupling the Transmitter and Receiver is
possible. Tap on the blue "TX" or "RX" header to bring up the Copy menu. Copy menu options are Coupled, Tx=Rx, and Rx=Tx.
Accessing the Copy Menu
TX300S_e-manual_D07-00-064P_RevA00