VeEX VePAL TX300M, User Manual

Page: 223 / 421

SubAddress Type:
NSAP to select the Network Service Access Point subaddress
User to use a subaddress defined by a user (no standard applied)
When the test is finished, the screen displays a list of these services:
Supplementary Scan Results
CLIP
: Calling Line Identification Presentation - presents the Calling Party Number to the called user.
CLIR
: Calling Line Identification Restriction - prevents the Calling Party Number from showing to the called user.
CFU
: Call Forwarding Unconditional - diverts a received call to a specified different number.
COLP
: Connected Line Identification Presentation - the answering party's number is conveyed to the calling party.
COLR
: Connected Line Identification Restriction - allows the connected subscriber to stop COLP from operating.
CFB
: Call Forwarding Busy - Calls are forwarded to a specified number only when the subscriber's (called party) number
is busy.
SUB
: Sub Address - a digit is added to an incoming call to specify an extension.
MSN
: Multiple Subscriber Number - multiple full numbers are assigned to one BRI line.
CFNR
: Call Forwarding No Reply - Calls are forwarded to a specified number only when the subscriber (called party) does
not pick up the line in a specified amount of time.
DDI
: Direct Dialing In - adds a number of telephone number to a circuit which can be used to dial that BRI (common use
is a company number with individual 4 or 4 digit extension numbers that can be dialed)
TX300S_e-manual_D07-00-064P_RevA00