Left Front Heat Sink Component
Replacement Procedures
Force EZ-C Series Service Manual
8-17
Left Front Heat Sink Component
Equipment
•
Phillips screwdriver
Remove the Left Front Heat Sink
1.
Turn off the generator and disconnect the power cord from the wall receptacle.
2.
Loosen the four screws that secure the cover to the chassis. Lift the cover off
the chassis.
3.
Remove the two screws that secure the left front heat sink to the Power
Supply/RF board. Save the screws for reinstallation.
4.
Carefully lift the left front heat sink to disconnect the heat sink components
from their sockets on the board.
Warning
Electric Shock Hazard
.– To allow stored energy to dissipate after disconnecting
power, wait at least five minutes before replacing parts.
Caution
The generator contains electrostatic-sensitive components. When repairing the
generator, work at a static-control workstation. Wear a grounding strap when
handling electrostatic-sensitive components,
except
when working on an
energized generator. Handle circuit boards by their nonconductive edges. Use an
antistatic container for transport of electrostatic-sensitive components and circuit
boards.
