Universal Devices ISY-994i Series, User Manual

Page: 452 / 692

Page | 429
The above programs will START a fade up or fade down, but you also need the code below
so the ISY-99i knows when to STOP the fade:
If
IR 'TV : 1' is Released
Then
Set 'Light1' Fade Stop
Else
- No Actions - (To add one, press 'Action')
16.3.6 Summary
The above code examples show how to setup a single remote-control button to turn on,
turn off, brighten, and dim a light from the ISY-99i. You could also configure separate
buttons to turn on and off the light, and even use a /- button to fade the light up or
down!
16.4 Adding IR Commands
80
16.4.1 What are ISY IR Commands
On the front of the ISY there is a IR receiver which can see remote control IR signals. These
signals can then control devices and scenes linked to the ISY thru ISY Programs.
16.4.2 Default IR Commands
Starting with firmware version 2.7.1, we now have a default set of 40 IR codes that can be
downloaded to your ISY through the Admin Console ("Import Default IR Codes" button).
Please note that this will REPLACE any existing IR codes you may have already taught to
your ISY.
The ISY is now listed on Harmony's device database, making setup much easier for
Harmony owners. We also have a Pronto CCF file containing these 40 codes available for
download here: http://www.universal-devices.com/ir/99/isy-99.ccf
80 (Universal Devices)