Universal Devices ISY-994i Series, User Manual

Page: 512 / 692

Page | 489
•
Click on the second column where it says Select to Edit Content . This will bring up
Resource Editor
o
Choose https from the first drop down
o
Choose POST from the second drop down
o
For Host , type maker.ifttt.com
o
For Port , choose 443
o
For Timeout , use at least 1000 (if you get TCP response failures, increase the
timeout)
o
For Path , construct /trigger/<Event Name>/with/key/<Key> ... you need
to replace <Event Name> and <Key> with the values you retrieved in the last
two sections above.
▪
Example, if the Event Name is isyRules and the key is ABCDEF01234 ,
then the path would
be
/trigger/isyRules/with/key/ABCDEF01234
o
If you wish to send optional parameters:
▪
Change the Content Type header to: application/json
▪
Change Encoding to either Raw Text or C-Escaped
▪
In the Body type: { "value1" : "<your value 1>", "value2" : "<your
value 2>", "value3" : "<your value 3>" }
▪
Where <your value 1>, <your value 2>, and <your value 3> must be
replaced with whatever parameter you wish to send to IFTTT
▪
You can also use ISY Substitution Variables that will be replaced by
ISY at run time before submission to IFTTT
o
Click on the Save e button on Resource Editor
•
Click on the Save button to save all your resources to ISY
•
Click on the Test button to test your resource
•
Once satisfied, you can use the resource referenced by Name in your ISY Programs
18.7.10
ISY Portal/IFTTT/Ring Doorbell
You can use ISY Portal/IFTTT to integrate with Ring Doorbell ! For instance, you can have
the ISY do any function for example, flash the lights in the house.
•
Create a State Variable for use in the ISY. This Variable will show up in ISY Portal in
the dropdown (e.g. RingDoor)
•
Set up ISY portal for IFTTT use and create a ISY key for use