Universal Devices ISY-994i Series User Manual Download Page 309

Page: 309 / 692

Page | 286

11.5.2.2Program: TimedPress3

- No Conditions - (To add one, press 'Schedule' or 'Condition')

Then

Send X10 'H5/On (3)'

Else

- No Actions - (To add one, press 'Action')

11.5.3

KeypadLinc Combination Lock

Lighting controls are supposed to make life a bit EASIER, but for kids sometimes a bit

tougher is more fun. Kids seem to enjoy things that THEY know how to do, but not others.

I setup a KeypadLinc that, using my ISY, will turn on different lamps based on the

combination of different buttons that are lit. So, turn buttons C and H on, and Lamp1 goes

on. Turn one or both buttons off, and Lamp1 turns off. Turn buttons B and G on, and Lamp2
goes on. Turn one or both buttons off, and Lamp2 turns off.

Here's a video demonstrating what I did:

https://www.youtube.com/watch?v=7L2-

PBxfvc4

Maybe not very useful in most areas of the home, but fun for the kids room.

There is a second or so delay before the lamps typically react because these are not direct

links between the KeypadLinc and lamp modules - there is a program on my ISY that

watches for these conditions and turns on/off the lamps.

(posted by Michael D. Boulanger)

Summary of Contents for ISY-994i Series





















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ISY-994i Series

Reviews:

Related manuals for ISY-994i Series

Brands by name

Popular brands

Universal Devices ISY-994i Series, User Manual

Search results

Summary of Contents for ISY-994i Series

Reviews:

Related manuals for ISY-994i Series

Brands by name

Popular brands