Universal Devices ISY-994i Series, User Manual

Page: 115 / 692

Page | 92
6.11.3 Configuring Elk
6.11.3.1Overview
•
You need an Elk M1 user configured with a 4 or 6 digit access code that is allowed to
Arm, Disarm and Bypass the alarm
•
You need to enable non-secure communications on the Elk so that the ISY can
communicate with it
6.11.3.2Configuring an Elk User with an access code to use from the ISY
•
Go to Users
o
Select the user that you want to use for the ISY connection
o
Ensure the user has a 4 or 6 digit access code defined
o
Select the following checkboxes:
▪
Arm
▪ Disarm
▪
Bypass
o
Make sure the following are not selected:
▪
Access
o
Click the [Send To Control] Button
•
Go to Globals
o
Select the G29-G42 tab
o
Select all six Serial Port 0 checkboxes
o
Click [Send to Control] button (you may need to connect first)
•
Select Save (under the main menu bar)
6.11.3.3Enabling Non-Secure Communications on the Elk
Launch the Elk RP2 application and do the following
•
Enable the non-secure port for M1XEP
o
Go to Account Details, click the [M1XEP setup] button