Universal Devices ISY-994i Series User Manual Download Page 74

Page: 74 / 692

Page | 51

5.3.2

Programs Tabs

5.3.2.1Programs -> Summary Tab

The Programs/Summary page displays a list of all your Programs and Folders, and

information about each. To open this tab, first click the

Programs

tab, then the

Summary

sub-tab.

Figure 51: Programs -> Summary Tab

Here are the columns of information available:

•

Name

: the Program

or Folder’s name

•

Enabled

: shows whether the Program is currently enabled or disabled.

•

Run At Startup

: shows whether the Program is set to run at startup.

•

Activity

: shows if the Program is currently running or is idle.

•

Status

: shows if the Program

’s IF

statements are currently true or false.

•

Path

: the Folder that the program is located in.

•

Last Run Time

: the last time the Program

’s IF

statements were evaluated.

•

Last Finish Time

: the last time the Program completed.

•

Next Scheduled Run

: the next time the Program is scheduled to run, if applicable.

Each column can be sorted by clicking its column heading.

There is a toolbar on the top portion of the screen that you can use to interact with ISY
programs in a variety of ways.

Summary of Contents for ISY-994i Series





















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ISY-994i Series

Reviews:

Related manuals for ISY-994i Series

Brands by name

Popular brands

Universal Devices ISY-994i Series, User Manual

Search results

Summary of Contents for ISY-994i Series

Reviews:

Related manuals for ISY-994i Series

Brands by name

Popular brands