Universal Devices ISY-994i Series, User Manual

Page: 511 / 692

Page | 488
•
The Method should be POST
•
Click on Create Action . You are ready to test!
18.7.4
Passing values from IFTTT event
In addition, you can pass values from IFTTT events to a state variable or a dimmable
device. To do so, set your portal event with the action
IFTTT Value . Then in the maker
channel, you can pass the value in the Body field. Just make sure to set the Content Type
to text/plain .
18.7.5
Using relative or absolute values
Values can be an absolute, or relative. To send a relative value, just precede the value with
a + or - .
•
Examples (Device)
o
Device values are always set as a percentage
o
Use 0, to turn off the device
o
Use +25, to increase the device level by 25%
•
Examples (Variables)
o
To increase a state variable by 10, just enter +10
o
To set your state variable to 10, then just enter 10
18.7.6
Creating Outbound Triggers
You can use the Network Module to send outbound triggers to IFTTT.
18.7.7
Setup Instructions - IFTTT
•
Go to https://ifttt.com and login
•
Create a recipe
•
In the THIS section, choose maker , and give it an Event Name (you will need this in
ISY)
•
Complete your recipe with a THAT of your choice
18.7.8
Setup Instructions - Maker
•
Go to https://ifttt.com/maker and login
•
Take note of your maker channel IFTTT Key (you will need this in ISY)
18.7.9
Setup Instructions - ISY
•
Go to Admin Console | Configuration | Networking | Network Resources tab
•
Click on the Add button and give your resource a Name (you will need this in ISY
Programs)