Universal Devices ISY-994i Series, User Manual

Page: 670 / 692

Page | 647
24.5 Compatibility
24.5.1 Is the ISY compatible with SimpleHomeNet products?
ISY works with most SimpleHomeNet products. As a matter of fact, with ISY, you can link an
EZRain Sprinkler valve to a button on a controller (KeypadLinc, ControLinc, etc.). We are
currently working on supporting EZIO such that you could either link the dry contacts
(inputs) to another (linkable) INSTEON device or use Triggers to do a series of actions (up
to 6) based on EZIOs inputs. In any case, since the firmware is upgradable over the
network, you should rest assured that all enhancements will be notified to registered users
and thus you can upgrade your product for every new supported product/feature.
24.5.2 Is this unit compatible for Europe? Even if it is not CE certified, will it
work?
•
ISY's processor board is CE certified. The ISY is a 5/6 volt, 300 milliamps, DC device
so you could use a power transformer that would match the needed voltage and
current requirements. On the other hand, the INSTEON products would need
voltage/phase/frequency converters. So yes, it could work but would require some
serious workarounds. See Note Below
24.5.3 Are X-10 single phase 110V/120V or two phase 220V/230V devices
compatible?
•
The ISY does now support X-10. X-10 single phase 110V/120V is compatible.
24.6 Specifications
24.6.1 Hardware
Freescale 5270 running at 100Mhz
512K flash
2MB RAM
2 Serial Ports: one for communications with PLM and one with a Shell which allows
administrative functions
SD Card Module: Up to 16GB holds a regular FAT file system
QSPI, I2C, PWM, and GPIO input outputs available
Real Time Clock on board