Universal Devices ISY-994i Series User Manual Download Page 381

Page: 381 / 692

Page | 358

to plan your installation ahead of time and

estimate the number of links

your PLM is

going to have.

If this issue has surfaced only after replacing a PLM, please follow the

instructions here:

http://wiki.universal-devices.com/index.php?title=ISY-99i/ISY-

26_INSTEON:File_Menu#Replace_Modem_.28PLM.29

If you have ever clicked on File | Delete Modem, then you must have a good backup

from prior to this operation, do a File | Restore ISY, and then followed by File |

Restore Modem (PLM)

The first step is to get the PLM Link count:

•

Go to

Tools | Diagnostics | Show PLM Link Table

•

click on the

Start

button, wait for completion

•

Once complete, click on the

Count

button

How many links do you have? You should have:

•

At least twice as many links in the PLM as the number of nodes in your device tree
(Admin Console/Left Pane)

•

At most 900 for 2413S PLMs

If Link count is 0:

•

Go to

file | Restore Modem (PLM)

... this will attempt to recreate all the links in the

PLM

•

Once Restore Modem (PLM) is completed, count the number of links in the PLM
again using the procedure outlined above

•

If the link count is still 0, then in all likelihood the PLM is dead and has to be
replaced

If Link count is more than 900?

•

When you have too many large scenes, PLM link records are used up pretty quickly

•

It would be best to merge all most of the scenes with common members into one

•

If you have very large installation, consider using programs for some of the scenes

Summary of Contents for ISY-994i Series





















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ISY-994i Series

Reviews:

Related manuals for ISY-994i Series

Brands by name

Popular brands

Universal Devices ISY-994i Series, User Manual

Search results

Summary of Contents for ISY-994i Series

Reviews:

Related manuals for ISY-994i Series

Brands by name

Popular brands