Universal Devices ISY-994i Series, User Manual

Page: 438 / 692

Page | 415
delete the ISY nodes for a device, they will automatically reappear when using
Synchronize Nodes because the device is still part of the Z-Wave network.
•
Select (8) Synchronize Nodes → New & Deleted
o
Adds ISY nodes for devices that do not yet appear in ISY and removes ISY
nodes for devices no longer in the Z-Wave network.
•
Select (8) Synchronize Nodes → All
o
Adds ISY nodes for devices that do not yet appear in ISY, adds any missing
ISY nodes for devices already appearing in the ISY, and removes ISY nodes
for devices no longer in the Z-Wave network. This operation may take
significantly longer than just processing the
New & Deleted devices.
15.1.10 Backup
Takes a backup of all of your network information stored in the Z-Wave dongle. The backup
file is created on the ISY.
o
Select (9) Backup
o
After a confirmation popup window, the backup will begin and will take
anywhere from 8 to 40 minutes to complete (depending on the size of your
network).
15.1.11 Restore
This action factory resets the Z-Wave dongle and then restores it with data from the
backup file stored on the ISY. If no backup file exists then a restore is not attempted and the
dongle is not factory reset.
If you have added or removed devices since your last backup, you may have to add or
remove them again after the restore completes. In general, you never want to restore a
backup that does not match your actual Z-Wave network configuration.
o
Select (10) Restore
o
After a confirmation popup window, the restore will begin.