Chapter 3 Inserting and Removing Cards
Insert a Card
Release TR3.2.1
Turin Networks
Page 6-21
3
Important:
Each slot in the Traverse shelf has guides to properly align
the card into position for contact with the main and mesh backplanes. Use
these guides to ensure the card is properly aligned. This is easier to do if
you are eye level with the shelf. The card should insert easily into the
Traverse shelf. Do not force the card into position.
Insert the card in the Traverse 1600 or Traverse 2000 shelf using the
guides at the top and bottom of the card cage for proper alignment. Make
sure the card is vertical, from top to bottom, and that the card stays in the
guides from the front to the back of the shelf.
Figure 6-12 Traverse 1600 or Traverse 2000 Shelf with Guides
Insert the card in the Traverse 600 shelf using the guides for proper
alignment. If the Traverse 600 shelf is installed horizontally as in the
following figure, make sure the card is horizontal (from left to right) and
that the card stays in the guides from the front to the back of the shelf.
Figure 6-13 Traverse 600 Shelf with Guides
Table 6-6 Insert a Card (continued)
Step
Procedure
Card Cage Guides for
Card Alignment
Card Cage Guides for Card
Alignment
