manualshive.com logo in svg

Toshiba Satellite A20 Series, Maintenance Manual, Page: 122 / 495

Share
Download
Toshiba Satellite A20 Series Maintenance Manual Download Page 122

3  Tests and Diagnostics 

3.4  System Test 

Subtest 07 

DMI read 

Reads the factory setting for the serial and DMI numbers. 

Model Name 

: XXXXXX

 

Version Number 

: XXXXXX-XXXXX

 

Serial Number 

 

: XXXXXXXXXX

 

Model Number 

 

: XXXXXX-XXXXX

 

PCN/BND Number

 

: XXXXXXXXXXXXXXXXXXXX

 

UUID Number 

: XXXXXXXXXXXXXXXXXXXXXXXXX

 

To exit this subtest and return to the SYSTEM TEST menu, press Enter.  

Subtest 08 

DMI write 

The following messages appear in order. When this subtest is executed. Input 
each information. (If you do not replace the PCB, the DMI information should 
not be changed.) 

1. “

Enter Model Name ?

” is displayed. 

Input the computer’s model name and press 

Enter

. (e.g. DynaBook 

Satellite) 

2. “

Enter Version Number ?

” 

Input the computer’s version number and press 

Enter.

 (e.g. PS245U-AAA13) 

3.  “

Enter Serial Number ?

” 

Input the computer’s serial number and press 

Enter

. (e.g. Z2020855JU) 

4. “

Enter Model Number ?

” 

Input the computer’s sales model number and press 

Enter.

 (e.g. PS245U-

AAA13) 

5. “

Enter Bundle Number ?

” 

Input the computer’s PCN/Bundle number and press 

Enter

. (e.g. 

PCN1190CCZ01/S3A1320D990) 

6. “

Write data OK (Y/N) ?

” 

When 

Y 

is press, the DMI information is written to the Flash-ROM.  

Subtest 09 

CPU Temperature 

This subtest measures the CPU temperature to see if the cooling functions of 
the computer are effectively working. 

3-10  

Satellite A20 Maintenance Manual (960-444) 

Summary of Contents for Satellite A20 Series
















































































































































































































































































































































































































































































































Reviews:

No comments