33
Set function
No.
Functions that cannot be set or used
simultaneously
Preset
01
Sequence
External(voltage/resistance)
OVP/OCP
02
-
Hi-
Ω
03
-
Off timer
04
Sequence Delay External (On/Off)
Sequence
05
Preset Off timer
External (voltage/resistance)
External (On/Off) Delay Tracking
External
(voltage/resistance)
06
Preset Tracking
External (On/Off)
07
Off timer Delay
Delay
08
Sequence Off timer
Tracking
09
Sequence External (voltage/resistance)
External (On/Off)
Table
5-1
5-5-1. Preset function (01)
This function stores intended set values in advance. It is possible to
assign set values to be stored to three PRESET keys.
The values shown below may be preset. Note that any other values
may not be stored.
■
Set voltage
■
Set current
■
Set power
CAUTION
Once the
MENU
key is pressed to activate the preset function, setting of
the voltage, current and power is disabled. Set intended values to be
stored in advance, and store them using the preset function.
(1) Set a value to be stored and assigned to the PRESET key.
◆
See Section
“5-4. Various Setting” above.
(2) Press the
MENU
key until menu number
“01” is displayed.
