30
(2) Turning output on or off using the
CHA
CHB
key. (PSF-400L2 only)
The
CHA
CHB
keys are independent of each other, and it is possible to
output through the channel A or B by pressing the
CHA
or
CHB
key to
select the channel. However, output is disabled unless the
OUTP
ＵＴ
key is lit.
※
If neither CHA nor CHB key is lit, the OUTP
ＵＴ
key will not go on even if
it is pressed. (No output is provided.)
CHA
CHB
OUTPUT
Press CHA and CHB to make them lit.
(No output is provided.)
CHA
CHB
OUTPUT
Press OUTPUT to output
Fig.5-8 Output by Pressing
OUTP
ＵＴ
key
5-4-6. How to display the set value in outputting condition
The power supply unit displays the output value in the outputting
condition. Press the
ENTER
/
CHECK
key in this condition to change the
displayed output value into the set value.
※
Every press of the
ENTER /
CHECK
key alternates the setting mode and
output mode.
※
When output value display is changed into set value display in the
outputting condition, the A or V key blinks, indicating that the set
value is being displayed.
※
The set value is changed if the encoder is rotated in the setting mode.
The output value is changed if the encoder is rotated in the output
mode. Do not touch the encoder to check the set value only.
→
→
Output value
Press
CHECK
：
Set value
Press
CHECK
：
Output value
