32
5-5. Various Functions Available on Menus
Introduction
・
Every press of the
MENU
key changes the menu numbers.
・
MENU
options are available from
“01” to “07”. (Options are available
from
“01” to “09” on the PSF-400LS2 only.)
・
Press the
ESC
/
DISP
key to return from the
MENU
setting condition to the
normal condition.
・
To deactivate a function, select the setting mode of that function
again from the menu and deactivate it.
Use the following keys to set the functions:
・
MENU
key
・・・
Selects the menu options.
・
ENTER
/
CHECK
key
・・・
Validates numeric values and items.
・
ESC
/
DISP
key
・・・
Cancels the menu setting mode
(and returns to the normal state).
・
Encoder
・・・
Selects numeric values and items.
Illustrations in the descriptions below represent the following:
The basic flow of setting is as shown below:
(1) Press the
MENU
key until an intended function number is displayed.
(2) Press the
ENTER
/
CHECK
key to validate the function. Proceed to
setting of the next item.
(3) Set a numeric value or item with the encoder, and press the
ENTER
/
CHECK
key to validate it.
(4) When all intended items have been set, press the
ESC
/
DISP
key to
return to the normal state.
CAUTION
Any set value is validated only after the
ENTER
/
CHECK
key is pressed.
Be sure to check if the value is set properly after setting it.
Some functions may not be set at a time.
See Table 5-1 below and carry out setting properly.
7-segment LED for displaying voltage (power)
7-segment LED for displaying current (power)
7-segment LED for displaying the number of
cycles, step No., and menu No.
