28
5-4-1. How to set voltage
※
Check which channel is selected before setting the voltage of the
PSF-400L2 in order not to change the set value of the other
channel.
(1) Make sure that the
V
key is lit in green. If not, press the
V
key to
turn it on.
V
A
W
(2) Set an intended value with the encoder.
5-4-2. How to set current
(1) Make sure that the
A
key is lit in green. If not, press the
A
key to
turn it on.
V
A
W
(2) Set an intended value with the encoder.
5-4-3. How to set power
◆
See Section
“5-4-4. How to change into power display” below.
(1) Make sure that the
V
and
A
keys are lit. If not, press the
V
and
A
keys to turn them on.
(Both keys are lit in the power setting mode.)
V
A
W
If the
A
key is pressed while keeping the
V
key depressed, the
current display 7-segment LED enters the power display mode.
(
The
“W” LED on the side of the 7-segment LED is lit, indicating that
the power is displayed.
)
If the
V
key is pressed while keeping the
A
key depressed, the
voltage display 7-segment LED enters the power display mode.
(
The
“W” LED on the side of the 7-segment LED is lit, indicating that
the power is displayed.
)
(2) Set an intended value with the encoder.
