45
(4) Set the rise delay time with the encoder. When positive time is set,
output of the channel B is delayed from the channel A. On the
contrary, the channel B begins to output first when negative time is
set. It is possible to set the delay time in the range from -9.99
seconds to +10.00 seconds in units of 10 ms.
Turning off channel B
output 9.99 seconds earlier
Turning off channel B
output 10.00 seconds later
(5) Set the fall delay time with the encoder, and press the
ENTER
/
CHECK
key. Setting is complete now.
Turning off channel B
output 9.99 seconds earlier
Turning off channel B
output 10.00 seconds later
(6) Press the
ESC
/
DISP
key to quit the setting mode and return to the
normal condition.
