85
8-8-10
．
Tracking ON/OFF (
：
CONF
：
TRAC)
This command turns on or off the tracking function.
Setting
：
CONF
：
TRAC <value>
<value> is as shown below:
0: Off
1: On
Application
example
：
CONF
：
TRAC 1
Activates the tracking function.
Query
：
CONF
：
TRAC?
Inquires about the setting.
Response
example
1
Indicates that the tracking function is working.
“?” has the same
function as <value>.
Remark
This command causes an error if it is set for a one-output model
or during sequence operation (RUN).
8-8-11. External control setting (
：
EXT
：
MOD)
This command sets an external control mode.
Setting
：
EXT
：
MOD <value>
<value> is as shown below:
0: Setting from the panel or through communication
1: External control with voltage
2: External control with resistance
Application
example
：
EXT
：
MOD 1
Selects the external control with voltage.
Query
：
EXT
：
MOD?
Inquires about the setting.
Response
example
1
Indicates that external control with voltage is working.
“?” has the
same function as <value>.
Remark
This command causes an error during sequence operation (RUN).
