42
(1) Press the
MENU
key until menu number
“06” is displayed.
(2) Press the
ENTER
/
CHECK
key to enter the external control setting mode.
Select the intended control means (external voltage or external
resistance) with the encoder, and press the
ENTER
/
CHECK
key. (The
external control is set to OFF before shipment.)
Initial setting
External voltage
External resistance
(3) Select the objective of external control with the encoder.
The objectives are displayed as shown below.
CV
CC
IN
OUT
=
=
=
=
Constant voltage
Constant current
Control on the panel operation unit or from the
Personal computer
through the optional board
External control
Controlling constant voltage
from panel operation unit
Constant voltage
by external control
Controlling constant current
from panel operation unit
Constant current
by external contro
l
(4) Finally, press the
ENTER
/
CHECK
key to validate setting.
Setting is complete now.
(5) Press the
ESC
/
DISP
key to quit the setting mode and return to the
normal condition.
