91
8-8-23. Sequence mode setting (
：
SEQ
：
MOD)
This command sets sequence mode operation.
Setting
：
SEQ
：
MOD <value>
<value> is as shown below:
0: Stops sequence operation.
1: Sequence operation
– Waits for starting (PAUSE).
2: Sequence operation
– Executes (RUN).
Application
example
：
SEQ
：
MOD 2
Executes sequence operation.
Query
：
SEQ
：
MOD?
Inquires about the setting.
Response
example
2
Indicates that sequence operation is being executed.
“?” has
the same function as <value>
Remark
None
8-8-24. Sequence jump setting (
：
SEQ
：
STEP)
This command jumps to a specified step of sequence operation.
Setting
：
SEQ
：
STEP <value>
The <value> range is from 0 to 99.
This command is accepted in the wait-for-sequence status
(PAUSE) only.
Application
example
：
SEQ
：
STEP 2
Changes the sequence step No. into 2.
Query
：
SEQ
：
STEP?
Inquires about the setting.
Response
example
2,1
Indicates that step 2 is selected and the repetition frequency is 1.
Remark
This command causes an error during sequence operation
(RUN).
8-8-25. Sequence start step setting (
：
SEQ
：
START)
This command specifies a start step of sequence operation.
Setting
：
SEQ
：
START<value>
The <value> range is from 0 to 99.
Application
example
：
SEQ
：
START2
Sets the sequence start step No. to 2.
Query
：
SEQ
：
START?
Inquires about the setting.
Response
example
2
Indicates that sequence operation starts from step 2.
Remark
None
