89
8-8-18. Delay rise time setting (
：
DELAY
：
RISE)
This command sets or inquires about the delay time for turning on output.
Setting
：
DELAY
：
RISE <value>
The <value> range is from -9.99 to +10.00 in units of seconds.
Application
example
：
DELAY
：
RISE 0.3
Sets the delay time for turning on output to 0.3 second.
Query
：
DELAY
：
RISE?
Inquires about the setting.
Response
example
0.3
Indicates that the delay time for turning on output is set to 0.3
second.
Remark
This command causes an error during sequence operation
(RUN).
8-8-19. Delay fall time setting (
：
DELAY
：
FALL)
This command sets or inquires about the delay time for turning off output.
Setting
：
DELAY
：
FALL <value>
The <value> range is from -9.99 to +10.00 in units of seconds.
Application
example
：
DELAY
：
FALL 0.3
Sets the delay time for turning off output to 0.3 second.
Query
：
DELAY
：
FALL?
Inquires about the setting.
Response
example
0.3
Indicates that the delay time for turning off output is set to 0.3
second.
Remark
This command causes an error during sequence operation
(RUN).
8-8-20. Monitor inquiry (
：
MEAS?)
This command inquires about the monitored data. In response, the
voltage, current, power and CV/CC/CP status are returned.
Setting
None
Query
：
MEAS?
Inquires about the monitored data of the one-output model.
：
MEAS
：
A?
Inquires about the monitored data of the CHA.
：
MEAS
：
B?
Inquires about the monitored data of the CHB.
Response
example
20.00,5.00,100,0
Indicates that the output values are 20.00V, 5.00A and 100W
and the CV function is working.
※
The voltage, current, power and status are returned in
this order. The status is 0 (CV), 1 (CC) or 2 (CP).
Remark
None
