43
5-5-7. External control (On/Off) (07)
It is possible to turn on or off the output by shorting or opening the
signal pins with external contact signals.
Short circuit: Output On, Open: Output Off
◆
See Section
“5-7-4. Output On/Off with external contacts” below.
(1) Press the
MENU
key until menu number
“07” is displayed.
(2) Press the
ENTER
/
CHECK
key to enter the external output On/Off control
setting mode. Select On or Off with the encoder, and press the
ENTER
/
CHECK
key again to validate the setting. Setting is complete now.
The output control modes are displayed as shown below.
IN
OUT
=
=
On/Off control with the OUTPUT key
On/Off control with external contacts
On/Off control with the
OUTPUT key
External On/Off control)
(3) Press the
ESC
/
DISP
key to quit the setting mode and return to the
normal condition.
