T3DSO2000A Manual. Page 46
In normal mode, 5 pulses can be obtained on the screen with the sample rate of 1 GSa/s
at the maximum memory depth.
Set the trigger mode to "Single", the timebase to 50 ns/div. Turn on the Sequence
mode, and set the segments to maximum (5,000 in this example, up to 90,000
depending on the number of samples at the current time base). Wait patiently until
the acquisition completes, then all the waveforms satisfying the trigger conditions are
displayed onto the screen.
In Sequence mode, there is no waveform displayed on the screen until the acquisition is
completed. During acquisition, there is a counter on the screen indicating the number of
segments that have been acquired.
www.
.com
1.800.561.8187
