Teac LX Series, Instruction Manual

Page: 46 / 148

Starting Program
2-20
Note that if the LX-10L/20L is already being used from another PC, a red check mark is displayed and USE
is displayed in the status field. In such a case, you cannot connect to that LX-10L/20L.
If a TCP connection is not possible because of a problem such as an incorrect IP address for the same
segment, a grey check box is displayed along with IP ERR is the status field. In such a case, specify an
appropriate IP address or check the IP address settings (Subnet mask, Gateway, etc.) between the PC and
the LX-10L/20L, and then connect to the LX-10L/20L.
When connecting to an LX-10L/20L that exists in a different segment (and, for example, going beyond the
router), select the IP Direct check box, enter the address of the device to be connected, and then click
OK.