Teac LX Series, Instruction Manual

Page: 64 / 148

Input Amp Settings
4-8
AR-LXPA1 Setting Dialog
AR-LXPA2 Setting Dialog
Only combination of DC/OFF/FLAT selections is applicable at
Bal/Unbal
:
Unbal
.
z
At the AR-LXPA2 amp, you can select between 28 V DC and 24 V DC on the sensor power supply at the
internal dip switch. The factory default is 28 V DC. Contact TEAC for 24 V DC setting.
Select the weighting filter.
A: A filter
C: C filter
FLAT: Flat
Select HPF (High Pass Filter).
OFF: No
10Hz: 10 Hz
20Hz: 20 Hz
Select the input range (0.01 V, 0.0316 V, 0.1 V, 0.316 V,
1 V, 3.16 V, 10 V)
Select the coupling mode.
AC: AC coupling
DC: DC coupling
Select turning ON or OFF of the power supply to
the sensor connected.
OFF: No supply
4mA: Supply 4 mA constant current
Select Balanced or Unbalanced input.
Bal: Balanced
Unbal: Unbalanced
Automatically set to DC coupling for all 8
channels when the balanced input is
selected.