Teac LX Series, Instruction Manual

Page: 58 / 148

System Settings
4-2
System Settings
To specify settings fro the LX operations, from the
Setup
menu choose
System
.
Sample
Select the sampling frequency. Select the sampling frequency series including the sampling frequency to be
selected at the upper row, then select the sampling frequency within the list shown at the lower row. They
are to be limited based on the selected recording media and the tachometer pulse input channels. See
“1-13 Sampling Frequency and Number of Channels”.
LX-10/10L
You can select the sampling frequency series of 96k-1.5k only at the upper row for the sampling frequency of 96 kHz, 48
kHz, 24 kHz, 12 kHz, 6 kHz, 3 kHz, or 1.5 kHz at the LX-10/10L.
LX-20/20L
You can select the sampling frequency from the followings;
96k-1.5k for 96 kHz, 48 kHz, 24 kHz, 12 kHz, 6 kHz, 3 kHz, or 1.5 kHz
100k-1k for 100 kHz, 50 kHz, 20 kHz, 10 kHz, 5 kHz, 2 kHz, or 1 kHz
102.4k-1.28k for 102.4 kHz, 51.2 kHz, 25.6 kHz, 12.8 kHz, 5.12 kHz, 2.56 kHz, or 1.28 kHz
65.536k-1.024k for 65.536 kHz, 32.768 kHz, 16.384 kHz, 8.192 kHz, 4.096 kHz, 2.048 kHz, or 1.024 kHz.
AR-LXDC2
You can select 1k-1/60 for 1 kHz, 500 Hz, 200 Hz, 100 Hz, 50 Hz, 20 Hz, 10 Hz, 5 Hz, 2 Hz, 1 Hz, 1/2 Hz, 1/5 Hz, 1/10 Hz,
1/30 Hz, or 1/60 Hz when the low-speed sampling DC amp card is installed.
Select the sampling frequency.
Lock the panel.
Stop the fan during recording.
Record voice memos.
Set the clock.
Settings for the monitor
output and the generator
output.
Number of channels used for
recording at the slot 1.
Enable the slot.
Move among the tabs.