Teac LX Series, Instruction Manual, Page: 70 / 148

Calibration By Using Calibrator
4-14
Calibration By Using Calibrator
You can use a calibrator or a pistonphone to apply a sensor sensitivity based on the actual measurement at
the PA amp.
1.
Click on the toolbar at the stop state of the LX main unit.
2.
The
Channel Unit
table is displayed.
3.
Click
Calibration
.
4.
The
Cal. Sound/Vibration
dialog is displayed.
5.
After the calibration is done, click
Exit
or click to return to the main window.
Select the channel.
Select the type of the sensor to
use.
Select to use RMS or Peak value for
calibration.
Set the output level to match to the
calibrator to be used.
Start calibration.
Being displayed the progress of the calibration.
Apply the calibration result to the slope value.