Teac LX Series, Instruction Manual

Page: 97 / 148

Reproducing
5-15
Searches
You can narrow searches by using the status display area.
1.
With the View mode set in the paused or stopped status, click on any of the status-display boxes indicated
by arrows in the following diagram. After the color of the characters changes, click again.
2.
Specify the goal of the search.
Event search
Searches for the specified event mark.
The lower 2 boxes show the range of values
that can be searched.
Count search
Searches for times (hours: minutes: seconds) from
the start of recording.
The lower 2 boxes show the range of values that
can be searched.
Time search
Searches using your specified recording date and time.
Enter the date (year/month/day) and
time (hour: minute: second).
The lower 2 boxes show the range of values that
can be searched.
3.
After specifying the goal of the search, click the close button to close the dialog box. At the goal point, the
system enters the stopped status.
4.
Click on the toolbar. Data is reproduced starting from the goal point.