Teac LX Series, Instruction Manual, Page: 71 / 148

Zero Balance
4-15
Zero Balance
Whenever turning on the power, use the zero balance function at the ST amp.
1.
Click on the toolbar at the stop state of the LX main unit.
2.
The
Strain Zero Balance
dialog is displayed to start the zero balance.
3.
Start Zero Balance ...
is displayed while implementing the zero balance of all ST amp channels at the time.
4.
Completed
is displayed when the zero balance has been completed.
5.
After the zero balance is completed, click
Exit
or click to return to the main window.