Teac LX Series, Instruction Manual, Page: 78 / 148

Repeat Mode Settings
4-22
Repeat
Select this to enable the Repeat mode.
Start Condition
Specify a recording-start condition. If multiple conditions are set, the first condition satisfied will start recording.
Level:
Select this to enable a level trigger. You can set level trigger details in the dialog box displayed by choosing
Level Trig
and then
Property
. (See the next page.)
External
: Select this to enable an external trigger.
Timeout
: If a level trigger or external trigger has been enabled, you can force recording to start if a specified
recording-start condition is not satisfied during a specified period. Specify the period in seconds. When 0 is entered,
Timeout
is disabled.
Stop Condition
Specify a recording-stop condition. If multiple conditions are set, the first condition satisfied will stop recording.
Level
: Select this to enable a level trigger. You can set level trigger details in the dialog box displayed by choosing
Level Trig
and then
Property
. (See the next page.)
External
: Select this to enable an external trigger.
RecTime
: Enables you to stop recording after a set period has elapsed from the start of recording. You can set the
period in the dialog box displayed by clicking the button. After you have entered a period, the period is displayed in
this area.
z
Make sure to turn the trigger signal level to High before the next start, when you are using an external
trigger for start with a repeat recording by using REC TIME.
Repeat Count
Specify the number of times the trigger recording operation specified above is to be repeated. A file is made for each
of the specified number of times. You can also specify 1 time only. Specifying 0 will result in an unlimited number of
repetitions (repetitions until you manually stop recording).