Teac LX Series, Instruction Manual

Page: 69 / 148

Auto Offset
4-13
Auto Offset
The auto offset function of the LX Navi measures the voltage of each channel when clicking the
Auto Offset
icon, then reflects its voltage value to the header file. The waveform data in the LX Navi displays Y-axis data
by adjusting to zero by using this offset value.
1.
Click on the toolbar at the stop state of the LX main unit.
2.
The
Channel Unit
table is displayed.
3.
Click
Auto Offset
on the
Channel Unit
table at the timing to execute the offset. The LX measures the
voltages of the channels at the click timing and displays these values on the
offset
field.
4.
Click
OK
to apply the offset voltages displayed on the channels turning on their check boxes.
The
Confirm
dialog is displayed and then click
Yes
to set the values.