Teac LX Series, Instruction Manual, Page: 93 / 148

Recording Operations
5-11
9.
When recording to memory, the message Do you copy data? is displayed after recording stops. If you click
Yes
, the
Copy
dialog box is displayed. Use this dialog box to copy the data to the media or PC. (See the next
page for details.) If you again record data or power off the main unit before copying, the data in memory will be
lost. Or the data in memory will be lost if you playback.
If you have selected the
Auto Saving
option (after choosing
File
and then
New
) and the media has been
inserted, the above message is not displayed and the data in memory is automatically saved to the media.
The above procedure records the files shown in the following diagram.
Exch
anging Media
z
When Recording to Media
When the media becomes full during recording, a message is displayed and recording stops. The file up to that
point is made. You can replace the media and again start recording.
z
When "
Auto Saving
" Is Selected
When the media becomes full during copying, a message is displayed and copying stops. The file up to that
point is made. If you then replace the media, the remaining data will not be copied automatically. In such a
case, use the
Copy
dialog box to copy the remaining data. After replacing the media, you can again start
recording.
z
Directory and ID Number After Media is Replaced
When the media is replaced, the directory and file name specified in the
New
dialog box are made on the media
and data is recorded; however, the ID number again starts from 1. Also if the directory or file name specified
in the
New
dialog box already exists on the media, the last ID number is incremented by 1 and the new
sequential ID number is used.
REC FWD PAUSE FWD STOP
EVENT
Aaaaa001.dat
Aaaaa001.hdr Aaaaa002.dat
Aaaaa002.hdr