Teac LX Series, Instruction Manual, Page: 80 / 148

Interval Mode Settings
4-24
Interval Mode Settings
You can set trigger-action details in the dialog box displayed by choosing the
Setup
menu and then
Trigger
.
The settings in the above dialog box specify that there are to be 4 recordings, each of which shall begin
every hour on the hour from noon on August 15, 2001 and end in 5 minutes.
Interval
Select this to enable the Interval mode.
Start Time
Specify the date and time when the interval action is to start.
Rec Time
Clicking this displays a dialog box in which you can specify the recording period. The value you set is
displayed in this area.
Interval Time
Specify the interval to wait before recordings. (Note that this is not the cycle period.) Clicking this displays
a dialog box in which you can specify the interval. When recording to the media, the interval must be three
seconds or longer; to memory or a PC, one second or longer. The value you set is displayed in this area.
Repeat Count
Specify the number of times recording is to be repeated. A file is made for each of the specified number of
times. You can also specify 1 time only. Specifying 0 will result in an unlimited number of repetitions
(repetitions until you manually stop recording).
Enable the interval mode.
Specify the date and time of
starting the interval action.
Recording period
Pause period
Number of repetitions.