INSTRUCTION MANUAL
58
1
2
3
4
5
6
7
8
9
10
1. Tube holder, 2. Locking lever for positioner, 3. Positioner (pin to hole), 4. Gas spring, 5
Lift / lower locking knob, 6. Positioning plate (2 sets of holes), 7. Angle positioning plate,
8. Tube clamp operating lever, 9. Tube clamp, 10. Angle positioning knob.
To use the MFT:
Open clamp (9) by the lever (8).
Place the tube to Tube holder (1) and to the clamp (9), close the clamp.
Adjust height for the collaring of the left end of the tube: Pull knob (5) and adjust height,
the gas spring (4) will ease lifting.
Adjust correct positioning plate: open locking lever (2) and pull knob (3) to adjust height.
Lock the positioner. To slide the positioner to next positioning point (hole), pull the knob
(3) and push the device to point.
Adjust correct angle: Pull knob 10 and turn the angle plate to desired angle (positioning
holes are for rotation of 0, 5 or 50 degrees).
