INSTRUCTION MANUAL
48
6.4. THE LUBRICATION OF THE COLLARING PROCESS
The use of a lubricant is recommended when collaring most materials. The mist
lubrication system consists of the lubricator and a special-made nozzle pipe.
1
2
3
The mist lubrication system: 1. Pulse / min, 2. Oil amount regulator, 3. Air flow control
The use of the mist lubrication system:
1. Fill the oil container with lubricant (Use only lubricants recommended by T-Drill).
2. Point the lubrication nozzle so that the mist spray reaches the collaring area.
The quantity of lubricant is determined by means of the regulator. When tightening the
regulator, the amount of oil increases and when opening it, the amount of oil decreases.
¨NOTE!
¨
Make yourself familiar with the safety data sheet of the
lubricant before handling it.
¨NOTE!
¨
Check periodically the oil container in the mist lubrication. Air
pressure of the machine must be switched off when refilling oil container.
