COLLARING MACHINE
57
S-80
6.6. MANUAL FEED TABLE
1
2
3
Manual feed table parts: 1. Table frame, 2. Positioning device, 3. Positioner plate
This manual positioning table is designed for one certain 38 mm diameter bent tube and
two different sets of collars to it.
The manual positioning device is equipped with a two-stage positioning plate (“pin-to-
hole) and an angle and height adjustment to allow the bent tube to go through the S-80
machine.
The tube is clamped to the Manual Feed Table (MFT) and the collars are made to correct
positions using the horizontal positioning and angle positioner.
