COLLARING MACHINE
27
S-80
6.2.2.2.2. MANUAL SCREEN
1
2
3
4
5
6
1.
Choose the axis to
move from the pull-
down menu.
“Actual position” field shows the current position, and the
desired target position is written to the “Target position”
field. Tap the target field to open keypad.
Start button moves the axis to target position, tap Stop
button in case necessary to stop before target.
2.
Relative movement
3.
Jog movement
(+) and (-) buttons move the axis in steps (jog).
4.
Cylinders
Tap button to activate movement / function.
Clamp cylinder: open / close
Chuck lift cylinder: open / close the tool gripper
Chuck lock cylinder: open= S1 inner spindle free, close =
lock the tool on place (lock S1 inner spindle)
Tool stroke cylinder: To release the tool from the chuck
Tool stroke lock cylinder:
Gear lock cylinder: open = 1:1 cylinder at rear position and
planetary gear is locked. Close = 4:1 collaring ratio
5.
Others
Tap button to activate movement / function.
6.
Servo motors-button
Access Servo motors screen
