COLLARING MACHINE
19
S-80
¨NOTE!
¨
Never use the T-Drill machine USB socket to charge mobile phones or
any other devices. The USB connection is only for program upload / download.
6.1.3. CONTROL PANEL
1
2
3
4
5
6
8
9
10
7
1
Touch panel display
Operation modes and adjustments
2
Work cycle STOP
PAUSE
Controlled stopping of the automatic work cycle.
Push shortly to PAUSE. When on PAUSE of the cycle the pilot
lamp blinks. The cycle can be started again by pressing the
“cycle start” push-button.
If the button is pushed for 2 sec. the automatic work cycle
stops completely.
3
Work cycle START
Push to start the automatic work cycle. A pilot lamp signals that
the automatic work cycle is on.
4
MAN - 0 - AUTO
5
Enter the safety area
request button
Request to enter safety area. A controlled stopping of the
machine to next step of the program.
6
Reset safety curtain button
/ Reset air pressure supply
The button blue light is not lit, when the machine is ready,
power is on, and the safety curtain is activated. Push the button
for approx. 1 sec.
Reset air supply after Emergency stop, push the button.
To make a controlled machine reset, push 10 sec! See
troubleshoot!
7
USB-connection. Only for memory stick!
8
Emergency stop (release
by turning)
Stops the machine in case of danger.
9
Machine OFF push-button Disconnects the control power from the S-80 machine. The PC
is on and can be used to program.
10
Machine ON push-button
Puts the cutting machine in state of readiness, switches the
control on to the machine. Green light in a pilot lamp is lit.
