INSTRUCTION MANUAL
16
5.4. CONNECTION OF THE MACHINE TO THE SOURCES OF ENERGY
1
2
1. Electric supply, into the electric cabinet from below, 2. Air supply hose is lead under the
covers, to the rear of the S-80 machine (see 5.4.2.)
5.4.1. CONNECTION TO THE ELECTRICITY NETWORK
a
DANGER! Disconnect the electric current to the supply cable before
starting to carry out the connection - fatally dangerous voltage.
a
DANGER! Even when the main switch of the unit is in OFF / (O) position,
the switch as well as the supply cable are alive - fatally dangerous voltage.
a
DANGER! Only a qualified and authorized person is allowed to carry out
the connection of the S-80 unit to the mains.
The terminals for connection of the external supply cable to the S-80 unit are placed in
the electric cabin. The supply cable is lead under the electric cabin into the cabin.
Special attention is to be paid to correct grounding of the machine. Make sure the
operating voltage of the machine corresponds to the supply voltage of the circuit. The
machine can be supplied with a voltage of 400 V/50Hz.
Check the correct connection with the help of the circuit diagram supplied with the
machine. Compare the diagram with the values on the identification plate of the
machine.
