COLLARING MACHINE
63
S-80
8. MAINTENANCE
To perform machine maintenance, shut down power from the machine main
switch and shut down air supply. Lock the main switch and air pressure supply
switch with a padlock in order to prevent unauthorized use of the machine or
unintended starting.
The machine doors have safety switches, that work as an emergency stop switch.
Maintenance intervals
Interval
Maintenance
Lubricant / tool
Note
On every tool
change
Clean tool with a lint-
free cloth and lubricate
cone lightly
Use spray oil (Wurth
HHS 2000 or equivalent)
No regular maintenance
required
Daily
Clean all tools,
tool fastening unit,
positioning device,
spindle chuck, tool store
and guides from metal
chips and debris
Use a lint-free cloth to
clean machine surfaces
Daily
Check all tube fasteners
(tube size specific) and
tools before starting to
operate the machine
Daily
Check the condition of
all safety devices.
Daily
Check the chip tray and
oil collecting tray, and
empty when required.
Weekly
Check energy chains for
wear and tear weekly.
Use a lint-free cloth to
clean machine surfaces
1 month
Lubricate the clamping
device centering
mechanism.
Vaseline: KLÜBER
ISOFLEX TOPAS L152
(NLGI 2) or equivalent
1 month
S-80 unit inner spindle
conical roller bearings
Vaseline: KLÜBER
ISOFLEX TOPAS L152
(NLGI 2) or equivalent
2 strokes from the
grease gun
1 month
Lubrication of the
spindle planetary gear
and needle bearing:
Vaseline: KLÜBER
ISOFLEX TOPAS L152
(NLGI 2) or equivalent
Lubricate with grease
gun: two strokes.
There are 2 grease
nipples!.
