COLLARING MACHINE
25
S-80
6.2.2.2.1. PROGRAMS
1
2
3
4
5
1
Tap to enter program screen
2
Program file list, downloaded from the computer (predefined location).
3
Reads the activated line program from the PC to the display
4
Saves (writes) the program changes to the PC
5
Program contents list:
Function
Function number defines what is to be done.
Function number 0-9 are reserved for the special commands.
From that on the first number indicates how many stages the
function has, and the following number indicates what work cycle
with this amount of stages is done.
For example:
Function 30 tells that is has 3 stages and the first work cycle is
done as described in the table.
Function 12 tells that it has 1 stage and the first work cycles
collaring
Position
Only used when the machine is equipped with a feed table.
Rotation
Only used when the machine is equipped with a tube rotation
module. Expression 0-360 degrees.
Diameter
Diameter of the collar or a round hole. The elliptic pilot hole is
defined automatically by the size of the collar.
Height
The height of the collar from the outer surface of the tube. (The
outer surface is count from the tube outer diameter divided by 2.
The diameter value can be altered by adjusting the offset).
